To Next PageTo Next PageHow to fix a Casio XJ-M140 when the power does not turn on?
If the POWER/STANDBY indicator is not lit, ensure the AC power cord is correctly connected. If the TEMP or LIGHT indicator remains flashing or lit, consult the “Error Indicators and Warning Messages” in the User’s Guide.
What to do if my Casio XJ-M140 Projector shows no image or an abnormal image?
If no image is projected or the projected image is abnormal on your Casio Projector, first ensure that the connected computer or video device is turned on and outputting a video signal. Next, select the correct input source on the projector that corresponds to the connected device. If you're using the component output terminal of a video device, connect it to the VIDEO or S-VIDEO terminal of the projector instead of the COMPUTER IN terminal.
Why is there no sound coming from my Casio Projector?
If there is no sound from your Casio Projector, first check the volume level on the projector itself by pressing the remote controller [VOLUME] key and using [T] and [S] to adjust the volume level. Also, verify that the volume level of the device connected to the projector is not too low and that it is outputting audio. Ensure the audio output of the connected device is correctly connected to the projector’s AUDIO IN terminal or AUDIO IN L/R terminal. Finally, make sure the “Audio Out” setting is set to “Speaker” and not “Line” in the setup menu “Option Settings 2 J Audio Out”.
How to fix blurry text on a Casio XJ-M140 Projector?
If the text is blurry on your Casio Projector, rotate the focus ring to focus the image. If that doesn't work, press the [AUTO] key to execute an automatic adjustment. If the issue persists, the frequency and phase may need adjusting in the “Image Adjustment 2 J Frequency” and “Image Adjustment 2 J Phase” settings on the setup menu. If the input source is a video camera or document camera, check to make sure there is no problem with the input source device.
Why does the remote controller not work with my Casio XJ-M140 Projector?
If the remote controller for your Casio Projector isn't working, first replace the batteries. If that doesn't solve the issue, ensure you are operating the remote controller within the allowable range of the projector.
What to do if my Casio XJ-M140 Projector has a strange color display?
If you're seeing strange colors on your Casio Projector, the input signal may not match the projector settings. Try adjusting the image brightness using the [BRIGHT] key, changing the color mode using the [COLOR MODE] key, or adjusting the projection image color balance using “Image Adjustment 1 J Color Balance” in the setup menu.
What to do if my Casio XJ-M140 Projector asks for a password?
If the message “Please input the password.” appears on your Casio Projector, the “Option Settings 1 J Power On Password” setting on the setup menu is turned on, meaning the projector is password protected. Input the correct password, and then press the [ENTER] key.
How to change the language on a Casio Projector?
To change the language on your Casio Projector, follow these steps: 1. Press the [MENU] key to display the setup menu. 2. If the input signal is HDMI, press [T] four times and then press the [ENTER] key. If the input signal is not HDMI, press [T] five times and then press the [ENTER] key. 3. Display the language selection menu. If the input signal is RGB, press [T] six times and then press the [ENTER] key. If the input signal is not RGB, press [T] five times and then press the [ENTER] key. 4. Use the [T] and [S] keys to move the highlighting to the language you want to select and then press the [ENTER] key. 5. Press the [MENU] key to exit the setup menu.
Why won't the light source unit light on my Casio XJ-M140?
If the light source unit in your Casio Projector does not light, it has likely reached the end of its service life or is malfunctioning. Contact your original dealer or an authorized CASIO service center for replacement.
General| Matrix size | 0.55 \ |
|---|---|
| Number of colors | 16.78 million colors |
| Projection distance | 1 - 4.9 m |
| Projection technology | DLP |
| Contrast ratio (typical) | 1800:1 |
| Screen size compatibility | 30 - 300 \ |
| Projector native resolution | XGA (1024x768) |
| Keystone correction, vertical | ±30 ° |
| Power LED | Yes |
| Aspect ratio | 4:3 |
| RS-232 ports | 1 |
| Dimensions (WxDxH) | 311 x 82 x 244 mm |
| Focus | Manual |
| Offset | 100 % |
| Focal length range | - mm |
| Light source type | LED |
| Service life of light source | 20000 h |
| DVI port | No |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | - |
| Component video (YPbPr/YCbCr) in | 0 |
| Analog signal format system | NTSC, PAL M, PAL N, SECAM |
| RMS rated power | 5 W |
| Placement | Ceiling |
| Product color | White |
| Power consumption (standby) | 0.4 W |
| Power consumption (typical) | 190 W |
| Noise level | 33 dB |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Cables included | VGA |
Weight and Dimensions| Weight | 3900 g |
|---|
Explains the meaning of various safety symbols and common icon examples used in the guide.
Details critical safety measures to take while operating the projector, including handling abnormalities.
Important precautions for safe use and handling of the power cord and risks associated with water.
Prohibits disassembly and warns about risks from dropping or mistreating the projector.
Addresses safe disposal, lens/vent safety, vent blockage, cabinet access, cleaning, hot vents, placement, heavy objects, water, and stability.
Covers safety related to casters, lightning, remote control, wireless adapters, power cords, data backup, and lens effects.
Detailed safety guidelines for handling, misuse, and disposal of batteries.
Lists individuals who should not view 3D images and symptoms that require stopping viewing.
Advises on viewing duration, spatial awareness, using correct glasses, and vision correction.
Information on the light source unit's life and warranty, and safety warnings for the Class 1 laser device.
General precautions to prevent malfunction and damage from environmental factors and improper handling.
Covers image quality adjustments, handling hot components, stowing, and cleaning procedures.
Lists items to check during unpacking and provides an overview of projector components.
Instructions for loading batteries and positioning the projector for optimal projection.
Important setup precautions and how to adjust the projector's elevation angle.
Details on how to connect a computer to the projector using a D-Sub cable.
Step-by-step guide to powering on and beginning projection with the projector.
Instructions for properly shutting down and powering off the projector.
How to access and view PDF user guides from the included CD-ROM.
Information on installing software from the CD-ROM for USB port models.
Explains the meaning and status of the projector's indicator lights.
Provides solutions for common projector problems like power, image, sound, and language issues.
