Why I cannot play movie files on Movie Mode file menu on Casio XJ-M145 Projector?
If you're unable to play movie files selected from the Movie Mode file menu on your Casio Projector, it could be that the file is corrupted. If you have the original file on your computer, check to see if it is normal. If it is, copy the original file to the memory device and try playing it again.
What to do if my Casio XJ-M145 shows no image or an abnormal image?
If no image is projected or the projected image is abnormal on your Casio Projector, first ensure that the connected computer or video device is turned on and outputting a video signal. Next, select the correct input source on the projector that corresponds to the connected device. If you're using the component output terminal of a video device, connect it to the VIDEO or S-VIDEO terminal of the projector instead of the COMPUTER IN terminal.
Why is there no sound coming from my Casio XJ-M145 Projector?
If there is no sound from your Casio Projector, first check the volume level on the projector itself by pressing the remote controller [VOLUME] key and using [T] and [S] to adjust the volume level. Also, verify that the volume level of the device connected to the projector is not too low and that it is outputting audio. Ensure the audio output of the connected device is correctly connected to the projector’s AUDIO IN terminal or AUDIO IN L/R terminal. Finally, make sure the “Audio Out” setting is set to “Speaker” and not “Line” in the setup menu “Option Settings 2 J Audio Out”.
How to fix blurry text on a Casio XJ-M145 Projector?
If the text is blurry on your Casio Projector, rotate the focus ring to focus the image. If that doesn't work, press the [AUTO] key to execute an automatic adjustment. If the issue persists, the frequency and phase may need adjusting in the “Image Adjustment 2 J Frequency” and “Image Adjustment 2 J Phase” settings on the setup menu. If the input source is a video camera or document camera, check to make sure there is no problem with the input source device.
Why I cannot play ECA or PtG files on Presentation Mode file menu on Casio XJ-M145?
If you cannot play ECA or PtG files you select on the Presentation Mode file menu of your Casio Projector, the file you are trying to play may be corrupted. Re-convert the PowerPoint files.
Why question marks appear instead of thumbnails on Casio XJ-M145 Projector?
Question marks are displayed in place of thumbnails of images that cannot be projected by Viewer (JPEG files larger than 8MB, etc.) on your Casio Projector.
What to do if some files are not displayed on Casio Projector?
If some folders or files are not displayed in the file menu of your Casio Projector, try reducing the number of folders and files in the folder.
How to fix viewer not appearing when connecting USB to Casio XJ-M145 Projector?
If the viewer doesn't appear when you connect a USB memory stick to the Casio Projector's USB port, it might be due to a few reasons. First, the USB memory might have a format that the projector can't recognize. To fix this, connect the USB memory to your computer and check if its file system is FAT or FAT32. If it isn't, reformat the USB memory to FAT or FAT32. Also, try using a different USB memory. Finally, check the 'Plug and Play' setting in the Data Projector’s settings.
What to do if Casio XJ-M145 Projector cannot play movie files?
If you cannot play movie files you select on the Movie Mode file menu of your Casio Projector, the file may be corrupted. Check the original file on your computer to see if it is normal. If it is, copy the original file to the memory device and try playing it again. If the message “This movie file cannot be played back.” appears, refer to “Viewer Error Messages”.
Why viewer does not appear when I connect USB to Casio XJ-M145 Projector?
If the Viewer does not appear when you connect a USB memory device to the Casio Projector's USB port, it could be due to the USB memory's format or the projector's Plug and Play setting. First, ensure the USB memory is formatted as FAT or FAT32 by connecting it to your computer and checking its file system. If it isn't, reformat it to FAT or FAT32. Also, check the projector's Plug and Play setting; if it's set to “Off”, change it to “On”.
Lists supported file types for USB memory devices.
Describes automatic operations when connecting USB devices with plug-and-play enabled.
Details the system requirements for installing the expansion software.
Explains conversion of PowerPoint files for projector playback.
Explains how to connect USB memory, memory cards, and digital cameras.
Lists common problems and solutions related to memory devices.
Steps to connect the document camera to the projector.
Details operations using the YC Camera function menu.
General| Resolution | XGA (1024 x 768) |
|---|---|
| Projection System | DLP |
| Lamp Type | Laser & LED Hybrid |
| Screen Size | 30 - 300 inches |
| Noise Level | 29 dB (Eco mode) |
| Brightness | 2500 ANSI Lumens |
| Max Resolution | 1600 x 1200 |
| Contrast Ratio | 2000:1 |
| Zoom | 1.2x |
| Inputs | HDMI, VGA, Composite Video |
| Outputs | Audio out |
To Next Page
