EasyManua.ls Logo

Casio XJ-S30 - User Manual

Casio XJ-S30
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Contents
E-1
English
English
Safety Precautions .....................................E-2
Operating Precautions ...............................E-6
Lamp Handling Precautions......................E-6
Lamp Replacement Precautions...............E-6
Other Precautions.....................................E-7
Unpacking ...................................................E-9
Using the User Documentation on the
CD-ROM ...................................................E-9
Projector Features and Main Functions
....E-10
General Guide ...........................................E-10
Remote Controller General Guide ..........E-12
Preparing the Remote Controller ............E-12
Replacing the Remote Controller Battery
....E-13
Getting Ready ...........................................E-14
Setting Up the Projector..........................E-14
Setup Precautions ..................................E-15
Adjusting the Projector Elevation Angle
....E-16
Rear Projection
(From the Back of the Screen)................E-16
Connecting a Computer to the Projector
...E-17
Connecting to a Standard Video Device
...E-17
Connecting a USB Device to the Projector
(XJ-S35 Only) .........................................E-18
Turning On the Projector ........................E-19
Turning Off the Projector ........................E-21
Projector Basics .......................................E-22
Selecting the Input Source......................E-22
Adjusting the Projected Image................E-22
Keystone Correction (KEYSTONE) ........E-23
Using the Setup Menu..............................E-24
User Maintenance.....................................E-25
Cleaning the Projector ............................E-25
Reattaching the Lens Cover ...................E-26
Replacing the Lamp................................E-26
Troubleshooting .......................................E-30
Indicators ................................................E-30
Projector Troubleshooting.......................E-35
Specifications ...........................................E-37
DLP is a registered trademark of Texas Instruments Incorporated of the United States.
Microsoft, Windows, Windows NT, Windows XP, the Windows logo, and PowerPoint are
registered trademarks or trademarks of Microsoft Corporation in the United States and other
countries.
Apple and Macintosh are registered trademarks of Apple Computer, Inc. of the United States.
Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated.
XGA is a registered trademark of IBM Corporation of the United States.
Other company and product names may be registered trademarks or trademarks of their
respective owners.
The contents of this User’s Guide are subject to change without notice.
Copying of this manual, either in part or its entirety, is forbidden. You are allowed to use this
manual for your own personal use. Any other use is forbidden without the permission of CASIO
COMPUTER CO., LTD.
CASIO COMPUTER CO., LTD. shall not be held liable for any lost profits or claims from third
parties arising out of the use of this product or this manual.
CASIO COMPUTER CO., LTD. shall not be held liable for any loss or lost profits due to loss of
data caused by malfunction or maintenance of this product, or any other reason.
The sample screens shown in this manual are for illustrative purposes only, and appear
differently from the screens actually produced by the product.
User’s Guide (Basic Operations)
Be sure to read the “Safety Precautions” on page E-2 and “Operating Precautions” on page
E-6 before trying to use this projector.
This manual covers only basic operations, including how to set up the projector, basic projector
operations, and how to replace the lamp. For more detailed information, see the User’s Guide
(UsersGuide_English.pdf) on the CD-ROM that comes with the projector.

Questions and Answers

  • J
    Jonathan MartinAug 7, 2025
    What to do if a Casio XJ-S30 has a system problem?
    • T
      Thomas BanksAug 7, 2025
      To resolve the issue, turn off the Casio Projector, disconnect the power cord, wait for all indicators to go out, then reconnect the power cord and turn the projector back on. If the error persists, contact your retailer or an authorized CASIO Service Center. Press the [ESC] key to clear the warning message.
  • M
    Michael MendezAug 11, 2025
    Why does my Casio XJ-S30 Projector say internal temperature is too high?
    • C
      Cassandra HolmesAug 11, 2025
      The projector’s internal temperature is very high. Press the [ESC] key to clear the warning message and check for any blockage of the projector’s intake and exhaust vents, ensuring sufficient space around the projector. If there is dust, turn off the projector and remove it.
  • M
    Miss Stephanie JohnsonAug 15, 2025
    Why does my Casio XJ-S30 Projector keep turning off because of high temperature?
    • M
      Melissa GravesAug 15, 2025
      Press the [ESC] key to clear the warning message and check for any blockage of the projector’s intake and exhaust vents, ensuring sufficient space around the projector. Turn off the projector and remove any accumulated dust. Disconnect and reconnect the power cord. If the error occurs again, contact your retailer or an authorized CASIO Service Center.
  • A
    Ann RodriguezAug 20, 2025
    What to do if Casio Projector turns off due to overheating?
    • A
      anna15Aug 20, 2025
      Perform the following steps: Check for any blockage of the projector’s intake and exhaust vents, ensuring sufficient space around the projector. If there is dust accumulated around the intake vents and/or exhaust vents, remove it. If there is no problem with the projector’s vents, confirm that the POWER/STANDBY indicator is lit amber (without flashing), and then turn power back on again. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center.
  • F
    ffarrellAug 25, 2025
    What to do if my Casio XJ-S30 Projector has a system problem and turns off?
    • B
      brownanthonyAug 25, 2025
      After confirming that the POWER/STANDBY indicator is lit red (without flashing), disconnect the power cord from the projector and wait for all of the projector’s indicators to go out. Next, reconnect the power cord and turn the projector back on. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center.
  • M
    Madison JohnsonAug 28, 2025
    What to do if my Casio XJ-S30 has a USB port problem?
    • E
      Eric MillerAug 28, 2025
      To resolve a USB port problem on your Casio Projector, turn the projector off and then back on. If the error continues after restarting, contact your retailer or an authorized CASIO Service Center. Press the [ESC] key to clear the warning message.
  • H
    hernandezlucasSep 2, 2025
    What to do if my Casio XJ-S30 fan is not working?
    • E
      Erik DanielsSep 2, 2025
      Confirm that the POWER/STANDBY indicator is lit red (without flashing) and that the fan has stopped. After checking the POWER/STANDBY indicator, disconnect the power cord from the projector and wait for all of the projector’s indicators to go out. Next, reconnect the power cord and turn projector power back on. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center.

Casio XJ-S30 Specifications

General IconGeneral
BrandCasio
ModelXJ-S30
CategoryProjector
LanguageEnglish

Related product manuals