E-15
Starting and Stopping Projection
1. Press the [P] (Power) key.
z This causes the confirmation message to appear. If you do not turn off the projector the
confirmation message will disappear automatically after about 10 seconds. The confirmation
message will also disappear if you press the [ESC] key.
2. To turn off the projector, press the [P] (Power) key again in response to the
confirmation message.
3. After checking to make sure that the POWER/STANDBY indicator has stopped
flashing amber and remains lit, unplug the AC power cord from the power outlet.
To turn off the projector
XJ-M_Setup_03_e.fm 15 ページ ２０１１年２月７日 月曜日 午後５時４４分
To Next Page
Loading...
