E-11
General Guide
English
[Bottom]
[Back, Terminals]
z The anti-theft lock hole is provided for connection of an anti-theft chain. Visit the
Kensington Lock Website at http://www.kensington.com/ for more information.
Warning
z Never look into the lens while the projector is turned on.
z Never allow the intake and exhaust vents to become blocked, and make
sure there is at least 30 cm (11.8 inches) clearance around the projector.
Blocked vents can cause heat to build up, creating the risk of fire and
malfunction.
z Never touch the areas around the exhaust vents. These areas can
become very hot, and create the risk of burn injury.
Warning
z Never allow the intake vents on the side or back of the projector to
become blocked. Blocked vents can cause heat to build up, creating the
risk of fire and malfunction.
Elevation adjustment foot
Left, right
adjustment feet (2)
Lamp cover
Elevation
adjustment foot
release button
Anti-theft lock hole
Intake vents
Remote control
signal receiver
VIDEO input terminal
RGB input terminal
USB port (XJ-S35 only)
Power connector
To Next Page
Loading...
Need help?
General
