EasyManuals Logo

Casio XJ-V10X Setup Guide

Casio XJ-V10X
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
EN-11
Operating Precautions
The projector’s exhaust vents and the area around the vents
become very hot during operation, and will still be hot immediately
after turning off the projector. Because of this, you should hold the
sides of the projector as shown in the illustration whenever
moving it.
Periodically clean the projector exterior, lens, intake vents, and exhaust vents on a regular basis.
When cleaning the lens, do not apply undue force and take care to avoid damaging it.
Dust and dirt tend to collect around the intake vents. Because of this, you should use a vacuum
cleaner to clean away accumulated dust and dirt periodically (about once a month).
Continued use of the projector after dust has accumulated around the intake vents can cause
overheating of internal components and lead to malfunction.
Certain operating conditions also can cause dirt and dust to accumulate around the projector’s
exhaust vents. If this happens, use the same procedure as that described above to clean the exhaust
vents.
Precaution when Handling the Projector after Use
Cleaning the Projector

Other manuals for Casio XJ-V10X

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Casio XJ-V10X and is the answer not in the manual?

Casio XJ-V10X Specifications

General IconGeneral
Number of colors1.073 billion colors
Native aspect ratio4:3
Projection distance1.95 - 2.87 m
Projection technologyDLP
Contrast ratio (typical)20000:1
Screen size compatibility30 - 300 \
Projection distance (tele)3.33 - 4.85 m
Projector native resolutionXGA (1024x768)
Keystone correction, vertical+ 30/ ± 30 °
FocusManual
Offset50 %
Digital zoom2 x
Optical zoom1.5 x
Zoom capabilityYes
Focal length range2.31 - 2.73 mm
DVI portNo
Audio (L/R) in0
Serial interface typeRS-232C
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Maximum digital resolution1920 x 1080 pixels
Operating temperature (T-T)5 - 35 °C
PlacementDesktop, Ceiling
Product typeStandard throw projector
Product colorWhite
Power source-
Power consumption (standby)180 W
Service life of light source10000 h
Service life of light source (economic mode)6000 h
Analog signal format systemNTSC, PAL, PAL 60, PAL M, PAL N, SECAM
Weight and Dimensions IconWeight and Dimensions
Width299 mm
Height97 mm
Weight3500 g

Related product manuals