Cassida C200 coin counter/sorter/wrapper
Moving money forward
1.3 Front and rear views
1. Control panel
2. Coin hopper Holds coins that need to be counted.
3.Cointrays Eachtrayholdsaspecicdenominationof
counted and sorted coins.
4. Plastic housing
When removed, provides access to the counting
mechanism for cleaning and repair purposes.
5. Rear access panel
Provides easy access to the interior mechanism
in order to remove foreign objects and coins.
6. Power switch Turns the machine on and off.
1
2
3
4
5
6
6
Name Function
START/STOP Starts or stops operation of the machine
C Clears the display and resets the count
SET Shows batch quantities set for each denomination
BAT
Selects preset batch quantities
(0, 10, 20, 25, 50, 80, 100, 120, 150, 200, 300, 400, 500)
- (Minus)
Decreases batch quantity by a value of 1
Also used to clear all batch quantities when pressed for 2-3 seconds
Increases batch quantity by a value of 1
Switches between value reporting and quantity reporting
+ (Plus)
Also used to set batch quantities for coin rolls when pressed for
3-4 seconds
REPORT
Shows value (or quantity) of coins counted for each denomination
1.4 Control panel
7
To Next Page
Loading...
Need help?
General
