38
4-roller drive
Plug-type connection for water return flow (red)
Plug-type connection for water forward flow (black)
Plug-type connection for water return flow (red) ... for
interconnecting cable
Plug-type connection for water forward flow (blue) ... for
interconnecting cable
Remote-control data transmission plug ... standardised
plug for interconnecting cable
- Socket with bayonet latch ... for interconnecting cable
Central torch connector ... for connecting up the welding
torch
Torch control connection socket ... for connecting the
torch control plug
Remote-control connection socket ... standardised con-
nection socket
Shielding gas connection socket
Gas-test button / wire-inching button
- gas-test ...for setting the required gas-flow rate on the
pressure regulator. After you press up and hold this
button, gas will flow out.
- wire-inching ... for feeding the wire electrode into the torch
hosepack with no flow of gas or current.
Wire-spool holder with wire-spool cover and braking
device ... for holding standardised welding-wire spools weig-
hing up to 16 kg
DS III wire feeder
Fig.5c Front view of DS III wire feeder
Fig.5d Side view of DS III wire feeder
Fig.5e Rear view of DS III wire feeder
To Next Page
Loading...
