Why does the pulse rate increase abnormally on my Cateye Exercise Bike?
If you are experiencing an abnormally high pulse rate on your Cateye Exercise Bike, ensure the pulse sensor is correctly attached to your earlobe and that it doesn't swing during exercise. If the sensor cable is damaged, replace the entire pulse sensor with a new one.
Why is the program suspended halfway on my Cateye Exercise Bike?
If the program on your Cateye Exercise Bike is being suspended, it might be due to the upper pulse limit alarm activating because your pulse rate is too high during the exercise. To prevent this, make sure you input your age correctly.
How to fix clattering noise with pedal rotation on Cateye Exercise Bike?
If you hear a clattering noise when rotating the pedals on your Cateye Exercise Bike, it may be because the pedals aren't firmly attached to the crank. Make sure the pedals are firmly attached.
What to do if the pulse rate is not displayed on Cateye Exercise Bike?
If the pulse rate is not being displayed and remains at "0" on your Cateye Exercise Bike, ensure the pulse sensor is correctly attached to your earlobe and that the sensor plug is securely inserted into the sensor jack. If the sensor cable is broken, replace the pulse sensor (part #1655210).
Why is the fitness level evaluation incorrect on my Cateye Exercise Bike?
If the fitness level evaluation seems incorrect on your Cateye Exercise Bike, ensure that the weight unit is set correctly. Also, verify that you have selected the correct fitness level evaluation table by checking the selector switch on the back panel of the control unit.
What to do if ERROR appears when inserting data card in Cateye Exercise Bike?
If an ERROR or irregular display appears when you insert the data card into your Cateye Exercise Bike, ensure the data card is not reversed. Hold the card with the yellow arrow side up and insert it in the direction of the arrow, inserting the card slowly. Also, ensure you haven't specified two or more programs or opened unnecessary holes; specify the program and conditions correctly.
How to turn on the pitch sound on Cateye Exercise Bike?
If the pitch sound doesn't ring on your Cateye Exercise Bike, check if the symbol is displayed on the LCD. If not, press the button on the control unit to make the symbol appear.
Essential precautions for preventing injury and hazards.
Step-by-step guide for assembling the bike and installing parts.
Connect control unit, pulse sensor, and adjust for comfort.
Test to evaluate physical fitness level.
Exercise at a constant target pulse rate.
Exercise at a constant energy expenditure (wattage).
Exercise at a constant pedal resistance (torque).
Simulated mountain cycling with varying resistance.
Understanding and utilizing your fitness assessment results.
Specific instructions for Aerobic Power, Auto, Isopower, Manual, and Hill programs.
Procedures for selecting the test and entering user information.
Solutions for problems with the display, sensor, or program.
Solutions for issues like display errors, sensor not reading, or program suspension.
General| Brand | Cateye |
|---|---|
| Model | Ergociser EC-1200 |
| Category | Exercise Bike |
| Language | English |
To Next Page
