Cateye ERGOCISER EC-1600

Questions and Answers

G
Gabrielle LinAug 15, 2025
Why does the display not appear on my Cateye Exercise Bike?
- J
  Jessica CaseyAug 15, 2025
  The display might not appear on your Cateye Exercise Bike due to several reasons: * The power supply may not be connected. Ensure the AC adapter is correctly connected. * The power switch might be off. Turn the power switch on. * The AC adapter cable could be damaged. If the cable or the interior circuit is damaged, replace the AC adapter.
E
Elaine BrownAug 19, 2025
What to do if the pulse rate is not displayed and remains at "0" on my Cateye ERGOCISER EC-1600 Exercise Bike?
- J
  Jason RobersonAug 19, 2025
  If the pulse rate on your Cateye Exercise Bike remains at "0", check the following: * Ensure the pulse sensor is correctly attached to your earlobe. * Make sure the sensor plug is securely inserted into the sensor jack. You can check the pulse sensor function according to page 11. If the sensor cable is broken, consider replacing the pulse sensor (part #1655210).
T
Tammie AndrewsAug 21, 2025
What to do if the printer does not work on my Cateye ERGOCISER EC-1600 Exercise Bike?
- C
  Charles MortonAug 21, 2025
  If the printer on your Cateye Exercise Bike isn't working, consider these possibilities: * Check if you've accidentally selected "not to use" the printer with the selector switch on the back panel of the control unit. If so, set the select switch No.4 to OFF. * See if the symbol is shown on the LCD. If not, press the button on the Control Unit to make the symbol appear. Note that if select switch No.4 on the back of the control unit is ON, the symbol won't appear even if you press the button. * The paper may be jammed. If so, remove the jammed paper.
M
mvegaAug 25, 2025
What to do if the date memory is incorrect on my Cateye ERGOCISER EC-1600?
- W
  William ParkerAug 25, 2025
  If the date memory on your Cateye Exercise Bike is incorrect, consider the following: * Verify that you have set the date correctly. * Check if the backup batteries are installed. If not, the date memory will be lost each time you turn off the power. Load the backup batteries. * Examine if the symbol is shown on the LCD. If so, replace the backup batteries, as they may have worn out.
K
Kelly JohnsonAug 27, 2025
What to do if the program is suspended half-way on my Cateye ERGOCISER EC-1600?
- J
  James EstesAug 28, 2025
  The program on your Cateye Exercise Bike might be suspending mid-exercise if the upper pulse limit alarm is triggered due to an excessive pulse rate. To prevent this, input your age correctly.
S
Sarah BonillaAug 30, 2025
What to do if ERROR or irregular display appears when you insert the data card into my Cateye ERGOCISER EC-1600?
- M
  Michael LeeAug 30, 2025
  If you encounter an ERROR or irregular display when inserting the data card into your Cateye Exercise Bike, check these points: * Ensure the data card is not reversed. Hold the card with the yellow arrow side up, and insert it in the direction of the arrow. * Avoid inserting the card too quickly; insert it slowly. * Make sure you haven't specified two or more programs, or opened unnecessary holes. Refer to P.42~43 and specify the program and conditions correctly.
I
iwilkersonSep 3, 2025
Why is the pulse rate increasing abnormally on my Cateye ERGOCISER EC-1600?
- M
  Monica FlemingSep 3, 2025
  If you notice an abnormal increase in pulse rate on your Cateye Exercise Bike, check if the pulse sensor is correctly attached to your earlobe. Ensure it's properly attached and avoid swinging the sensor or sensor cable during exercise. If the sensor cable is damaged, replace the pulse sensor with a new one.
C
Casey LopezSep 5, 2025
How to fix clattering noise heard with pedal rotation on Cateye ERGOCISER EC-1600?
- E
  efloydSep 6, 2025
  If you hear a clattering noise when rotating the pedals on your Cateye Exercise Bike, it might be because the pedals are not firmly attached to the crank. Attach the pedals firmly to resolve this issue.
B
Bradley PettySep 8, 2025
Why does the buzzer keep sounding on my Cateye ERGOCISER EC-1600?
- K
  Katie MoranSep 8, 2025
  The buzzer on your Cateye Exercise Bike might be continuously sounding if the pulse limit setting is too low due to an incorrect age input.
T
Todd RussellSep 12, 2025
Why doesn't the pitch sound ring on my Cateye ERGOCISER EC-1600 Exercise Bike?
- K
  Kimberly ArmstrongSep 12, 2025
  The pitch sound may not ring on your Cateye Exercise Bike due to the following reasons: * Check if the symbol is shown on the LCD. If not, press the button on the control unit to display the symbol. * The unit does not give a pitch sound if the plug is out of the jack.