Catler ES 8010 - Trouble Shooting Guide

TROUBLE SHOOTING GUIDE
PROBLEM POSSIBLE CAUSES WHAT TO DO
Co ee does not run through Machine is not turned on or plugged in
Ensure the machine is plugged in, switched on at the power
outlet and the ‘on/o ’ button is in the ‘on’ position.
Water tank is empty Refer to step 1 – Filling the water tank on page 13.
Selector Control not in ‘Espresso’
position Turn the selector control to the ‘Espresso’ position.
Co ee grind is too  ne
Ensure you use a suitable espresso grind. Refer to ‘The Grind’ on
page 21.
Too much co ee in the  lter Refer to ‘Preparing the co ee’ on page 14.
Co ee tamped too  rmly Refer to ‘Tamping the co ee’ on page 14.
The  lter is blocked
Use the  ne pin on the cleaning tool to clear the holes. Please
refer to ‘Cleaning the  lters’ on page 26.
Co ee runs out too quickly The co ee grind is too coarse
Ensure you use a suitable espresso grind. Refer to ‘The Grind’ on
page 21.
Not enough co ee in the  lter Refer to ‘Preparing the co ee’ on page 14.
Co ee not tamped  rmly enough Refer to ‘Preparing the co ee’ on page 14.
28
TROUBLE SHOOTING GUIDE