ANNUAL MAINTENANCE
TO BE PERFORMED ONLY BY A TRAINED TECHNICIAN
Consideration should be given to the maintenance of the Cattani equipment
installed in your plant room. Implementation of a routine maintenance
schedule at your practice should be your highest priority.
Servicing your SMART Suction Unit on time annually is important. Annual servicing will reduce
the risk of unwanted breakdowns, interruptions or delays in daily practice and loss of income
due to stopping for unexpected repairs.
Routine servicing by a trained technician ensures the long term reliability of your equipment,
trouble free operation and greatest life expectancy.
Servicing of Cattani Suction equipment should be performed by a trained Authorised Service
Technician using only genuine Cattani parts.
PLEASE REFER TO USER MANUAL AND WARRANTY STATEMENT FOR FURTHER DETAILS.
WHAT SHOULD BE COVERED IN AN ANNUAL SERVICE?
- Complete System Check
This includes: Checking maximum detected temperatures and any other alarms on the display.
- The technician is required to check to make sure that routine maintenance has been duly
carried out and that the recommended Magnolia cleaning products are used.
- A complete service using the appropriate kit for the suction unit:
900051 or 900050 for Micro Smart and Micro Smart Cube
900053 for Turbo Smart, Turbo Smart 2v and Turbo Smart Cube
900026 for Maxi Smart
Technicians must make sure that when parts are reassembled all O-rings on the amalgam
container and debris filter are lubricated with the recommended Lubri Jet Spray (040735) or
Lubri Jet Drop (040726).
A simple diagnostic test should be completed after every service, please see the relevant
instruction manual for your unit.
To Next Page
Loading...
