3.1 Installation
• GROUND THE RECEIVER CASE. In order to ensure safety of the system, firmly connect the receiver
case to earth ground
• PROVIDE A SAFETY CUTOFF SWITCH. If maintenance is required, disconnect the radio from power to
prevent accidental activation
• USE PROPER WIRING. Loose or frayed wires can cause accidental activation of machinery
• DO NOT INSTALL IN HOT AREAS. This apparatus can be damaged by heat in excess of 160º F
• DO NOT INSTALL IN HIGH VIBRATION AREAS. The life of this apparatus may be shortened through
long exposure to intense shaking or vibration
3.2 Personal Safety
• MAKE SURE MACHINERY IS CLEAR BEFORE OPERATING. Do not activate the remote system unless
it is safe to do so
• TURN OFF THE RECEIVER POWER BEFORE WORKING ON MACHINERY. Always disconnect the
remote system before doing any maintenance to prevent accidental operation of the machine
3.3 Care
• KEEP DRY. If water or other liquids get inside, immediately dry the unit
• KEEP ANTENNAS CLEAN. Keep antenna connections clean and free of corrosion
Note: Throughout this manual, other safety rules appear under the following heading:
To Next Page
Loading...
Need help?
General
