Do you have a question about the Cayin A-50T and is the answer not in the manual?
Specifies the power output in different modes (Ultralinear, Triode).
Guidance on connecting speakers and audio sources correctly.
Instructions for connecting the power cord to the amplifier and outlet.
Detailed instructions for adjusting the bias voltage for EL34 tubes.
| Input Impedance | 100kΩ |
|---|---|
| Signal to Noise Ratio | 90dB |
| Signal-to-Noise Ratio (SNR) | 90dB |
| Input Sensitivity | 300mV |
| Output Impedance | 4Ω, 8Ω |
| Type | Integrated Amplifier |
| Tube Type | EL34 |
| Power Output (Triode) | 12W x 2 |
| Power Output (Ultralinear) | 25W x 2 |
| Total Harmonic Distortion (THD) | 1% |
| Vacuum Tubes | EL34 x 4, 12AU7 x 2, 12AX7 x 1 |
| Output Power (Class A) | 12W x 2 (Triode), 25W x 2 (Ultralinear) |
| Total Harmonic Distortion | 1% (1kHz, 1W) |
| Tubes | EL34 x 4, 12AX7 x 2, 12AU7 x 2 |
Loading...