To Next PageTo Next Page
Need help?Do you have a question about the ccei PHENIX and is the answer not in the manual?
General| Brand | ccei |
|---|---|
| Model | PHENIX |
| Category | Water Pump |
| Language | English |
Details dimensions, weight, power supply, and protection index of the PHENIX unit.
Covers measurement range, resolution, sensor type, calibration, and correction for pH measurement.
Details the type, maximum flow rate, and dosing capabilities of the integrated pump.
Describes the daily and total volume control functions for the PHENIX system.
Outlines the measurement range, sensor type, and calibration for RedOx potential analysis.
Lists all the accessories supplied with the PHENIX system for installation and operation.
Specifies the 8 languages available for the PHENIX menu interface.
Details the pH scale, its importance in pools, and how PHENIX adjusts pH levels.
Explains the RedOx potential (ORP) and its role in measuring water disinfectant capacity.
Describes how to navigate menus and interpret information shown on the PHENIX display.
Details the screens showing pH dosing mode, measured pH, set point, and injected volume.
Shows the screens related to ORP operating mode, programmed duration, and chlorine production activation.
Describes screens only visible in installer mode for internal meters and chlorine concentration.
Allows selection of pH regulation modes: pH-, pH+, ON, or OFF for product injection.
Enables the user to set the desired target pH value for the pool water.
Defines the maximum permissible volume of pH corrector to be injected per day.
Specifies the volume of the pH corrector container for tracking usage.
Provides instructions for calibrating the pH sensor using calibration solutions.
Allows selection of ORP regulation modes: REG, PRG, ON, or OFF for chlorine production.
Enables setting the desired RedOx potential threshold for chlorine production.
Defines the desired production duration for chlorine in PRG mode.
Explains the process for calibrating the ORP sensor using a 650mV solution.
Provides access to various configurable settings within the PHENIX system.
Allows the user to choose the display language from 8 available options.
Used to reinitialize counters and reset calibration effects to zero.
Instructions on handling and connecting the fragile pH and ORP sensors.
Illustrates the positioning of PHENIX parts on the pool's piping system.
Details the connection procedure for PHENIX with a CCEI LIMPIDO chlorinator.
Provides instructions for connecting PHENIX to a CCEI LIMPIDO EZ chlorinator.
Details the electrical connection steps for PHENIX with a CCEI ZELIA ZLT chlorinator.
Recommendations for storing pH and RedOx sensors to maintain their performance.
Guidance on reconditioning sensors to extend their lifespan and improve accuracy.
Explains sensor characteristics and when regular calibration is compulsory.
