CDA EVPC9 User Manual

4
Changing the Light
DO NOT CHANGE THE LIGHT BULB IMMEDIATELY AFTER USE AS THE
BULB WILL BE HOT. ALLOW IT TO COOL BEFORE REMOVING IT.
Unscrew the light bulb cover, please see figure 4. Unscrew the light bulb and replace
with a 12V 20W halogen light bulb. Finally, replace the light bulb cover.
Do not touch bulbs or adjacent areas during or straight after prolonged use of
the lights.
The light is designed for use during cooking and not for general room illumination.
Extended use of the light can reduce the life span of the bulb.
Bulb replacement is not covered by the guarantee.
Only use bulbs recommended for your extractor. Do not fit bulbs of a higher
power rating.
Bulbs of a lower power rating may be adequate for use, generally last longer and
use less energy.
C
D
Fig. 4

CDA EVPC9 Specifications

General

Brand	CDA
Model	EVPC9
Category	Ventilation Hood
Language	English