9
Changing the light
IMPORTANT: THE LIGHT BULBS SHOULD ONLY BE CHANGED BY
CDA AUTHORISED SERVICE AGENTS. IF ONE OR MORE OF YOUR
BULBS FAIL, CONTACT CDA CUSTOMER CARE TO ARRANGE A
SERVICE VISIT.
DO NOT TOUCH THE LIGHT BULBS IMMEDIATELY AFTER USE AS
THE BULB MAY BE WARM/HOT.
Do not touch bulbs or adjacent areas during or straight after pro-
longed use of the lights.
The light is designed for use during cooking and not for general room
illumination. Extended use of the light can reduce the life span of the
bulb.
To Next Page
Loading...
