To Next Page

To Previous Page

Triple zone function

The front-left zone is equipped with a triple zone function that allows

you to extend the heating area for the zone. In normal use, the zone

functions with just the smaller inner ring until the triple zone function is

activated.

To activate the triple zone function

• Simply set a power level on the front-left zone and then press the

triple zone sensor (8) once to activate the middle zone and press it

again to also activate the outer zone. The LEDs above the triple

zone sensor (8) will illuminate accordingly (one for when the double

zone is active and two for when the triple zone is active).

To deactivate the triple zone function

• Simply press the triple zone sensor (8) for a third time. Both LEDs

either side of the triple zone sensor (8) should extinguish and the

zone will return to operating on the inner zone only.

Dual zone function

The central zone is equipped with a dual zone function that allows

you to extend the heating area for the zone. In normal use, the zone

functions with just the lower circular ring until the dual zone function is

activated.

To activate the dual zone function

• Simply set a power level on the central zone and then press the

triple zone sensor (8) once to extend the zone. An LED above the

triple zone sensor (8) will illuminate to show you that the dual zone

CDA HC7621FR User Manual

Questions and Answers: