Why is my CDA hn9840 not working and the child lock LED is on?
If your CDA hob isn't working and the child lock LED is illuminated, it's likely because the child lock feature is active. To resolve this, simply switch off the child lock before attempting to use the hob.
What to do if my CDA hob does not work and the lights on the control panel do not switch on?
If your CDA hob isn't working and the control panel lights are off, it could be due to a power supply issue. Check the electrical circuit breaker and fuses to ensure the hob is properly connected to a functioning power source.
General| Number of Burners | 4 |
|---|---|
| Width | 590 mm |
| Number of Zones | 4 |
| Material | Glass |
| Energy Source | Electric |
| Control Type | Touch |
| Safety Features | Child Lock |
| Dimensions (WxD) | 590 mm x 520 mm |
Instructions for powering the hob on and off using the main control.
How to adjust the heat output for individual cooking zones using sliders.
Method for increasing or decreasing the heat setting for cooking zones.
Procedures for switching off individual cooking zones or the entire hob.
Critical advice to disconnect the appliance if the glass surface is damaged.
Requirements for hob placement relative to walls and surfaces.
Necessary air gaps and flow for proper hob operation and cooling.
Minimum distances required for cabinets and pelmets above the hob.
Important considerations for installing the hob, including ventilation and oven compatibility.
Specifies the required size and shape of the hole in the worktop.
Guidelines for safe and compliant electrical hookup by a qualified electrician.
Visual representation of the correct electrical connections for the hob.
To Next Page
