What to do if my CDA hn3620 is not working and the control panel lights are off?
If your CDA Hob isn't working and the control panel lights are off, it could be due to a power supply issue. Check the electrical circuit breaker and fuses to ensure the hob is properly connected to a functioning power supply.
General| Fuel Type | Gas |
|---|---|
| Number of Zones/Burners | 4 |
| Control Type | Rotary |
| Material | Stainless Steel |
| Ignition Type | Automatic |
| Hob Type | Gas |
| Gas Type | Natural Gas |
| Dimensions (WxD) | 580 x 510 mm |
Instructions for unpacking, professional installation, and domestic use precautions.
Advice on appropriate cookware, cleaning, spillages, and drawer installation.
Steps to take if a fault occurs, including broken glass warnings and service contact.
Methods to determine if cookware is suitable for induction hobs.
Step-by-step instructions for turning the hob on and adjusting power settings.
Procedures for switching off individual zones or the entire hob.
Instructions for setting a finish time for cooking zones.
Crucial information on earthing, fixed wiring, and professional electrical connection.
To Next Page
