23
Mains Electricity Connection
Warning! this appliance must be earthed
We recommend that the
appliance is connected by a
qualified electrician, who is a
member of the N.I.C.E.I.C. and
who will comply with the I.E.T. and
local regulations.
This appliance is intended to be
connected to xed wiring and is
not suitable for connection to a
13A plug or 13A supply.
This hob is intended to be connected to permanent fixed wiring by
a double pole switch, having a contact separation of at least 3mm in
all poles. The switch must be positioned no further than 2m from the
appliance.
Please note:
• The mains cable must only be replaced by a qualied electrician
or service engineer and must be of equivalent or better rating (i.e.
1.5mm
2
, HO5VV-F).
• This appliance is intended to be connected to the mains supply with
a cable of cross section area 1.5 mm
2
. A larger cable will not fit the
terminal connections.
• The current rating of the fuse or circuit breaker protecting this
$/5",%0/,%37)4#(%$
FUSE SPUR OUTLET
USE A 3 AMP FUSE
USE A 13 AMP FUSE
To Next Page
Loading...
Need help?
General
