EasyManuals Logo

CDA hn3620 User Manual

CDA hn3620
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
13
and hold the timer “+” or “-” keys to scroll through the duration
quickly.
After approximately ve seconds, the control LED stops ashing
and the countdown will start.
At the end of the set time, the the timer display will ash “00” and
the hob will beep for approximately one minute.
To switch o the beep and the ashing displays, touch any key.
Key Lock
The hob is equipped with a key lock to lock the controls. This can be
used when the hob is o.
To turn on the key lock
If the hob is not already turned on, turn it on by touching the
key.
Touch the “-” key and the “Zone selection” key for the front zone at
the same time, then touch just the front zone “Zone selection” key.
The hob beeps to confirm the key lock is switched on.
To turn o the key lock
If the hob is not already turned on, turn it on by touching the
key.
Touch the “-” key and the “Zone selection” key for the front zone at
the same time, then touch just the “-” key.
The hob beeps to conrm the key lock is switched o, then the hob
switches o. When turning the hob back on the key lock is turned o.
Residual heat indicators
The hob is equipped with residual heat indicators to warn when any
of the zones are still hot to the touch after cooking. An “H” will show

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CDA hn3620 and is the answer not in the manual?

CDA hn3620 Specifications

General IconGeneral
BrandCDA
Modelhn3620
CategoryHob
LanguageEnglish

Related product manuals