27
Place the pot with the food on the cooking zone and activate the
programme. This programme maintains a temperature of 90°C.
• Sear 200
A programme intended for searing dishes that require high
temperature. Place a pan or a dedicated grill tray on the cooking
zone and activate the Sear programme. The programme
maintains
a temperature of 200°C.
Activate the maintain temperature programme.
• Place the cookware on the cooking zone.
• Activate the cooking zone.
• Activate the selected temperature programme.
Pair and operate a kitchen hood*
T
o start wireless pairing of your kitchen hood and hob touch and hold
the automatic mode sensor for 3 seconds. The indicator will
flash
above the sensor. The indicator lights up permanently when the
appliances are successfully connected.
In automatic mode the hood adjusts the fan speed automatically
depending on the intensity of cooking. Touch to activate the
automatic hood mode. Automatic mode is confirmed by the letter A
appearing to the right hand side of the symbol where the hood
speed appears. Please note that the automatic mode can only be
enabled when the appliances are paired.
Touch to disable the automatic mode. The indicator above the
sensor will go out. Using the and sensors to manually control
the fan speed. When you use these sensors the automatic hood
mode will be disabled.
*depending on the model
To Next Page
Loading...
