Instruction Manual | 13
MENU
>
<
>
>
<
<
Adjusting the display brightness
You can adjust the display brightness 1 to 9, where 1 is the darkest and 9 is
the brightest. The brightness setting applies to an inactive control panel,
i.e. when no controls are touched for 7 seconds. You can adjust the display
brightness as follows:
• Simultaneously touch the / sensors,
• Touch repeatedly to select the
bri
(brightness) setting — the
settings can be accessed in sequence
ton
(tone) and
bri
(brightness).
• Use the / sensors to select your preferred brightness:
Use to select the setting from 1 to 9
Use to select the setting from 9 down to 1
Note: The display is at its brightest setting when active, i.e. a control was
touched within the last 7 seconds.
Night Mode
The display is automatically dimmed during the night hours 22:00 — 06:00.
Using the Airfry tray
Your oven comes with an Airfry tray. For best results, select the fan
cooking function (
) and place the Airfry tray on the 3rd shelf rack with
a tray on a shelf below.
To Next Page
Loading...
