CDA SC212 User Manual

9
Changing the Oven Lamp
Before any maintenance is started involving electrical parts, the
appliance must be disconnected from the power supply.
If the oven has been in use, let the oven cavity and the heating
elements cool down before attempting any maintenance.
Changing the bulb (fig. 2)
Unscrew the protective cover. We recommend that you wash and dry the glass
cover at this point.
Carefully remove the old bulb and insert the new bulb suitable for high
temperatures (300ºC) having the following specifications: 230-240V, 50Hz,
25W, G9 fitting.
Refit the protective cover.
IMPORTANT
Never use screwdrivers or other utensils to remove the
light cover. This could damage the enamel of the oven or the lamp
holder. Remove only by hand.
IMPORTANT
Never replace the bulb with bare hands as contamination from your
fingers can cause premature failure. Always use a clean cloth or gloves.
Please note:
The bulb replacement is not covered by your guarantee.
fig. 2

CDA SC212 Specifications

General

Grill	Yes
Oven size	Medium
Oven type	Electric
Number of ovens	1
Total oven power	2160 W
Number of shelf positions	2
Total oven(s) interior capacity	56 L
Noise level	- dB
Control type	Rotary
Product color	Stainless steel
Built-in display	-
Control position	Front
Appliance placement	Built-in
Current	13 A
AC input voltage	230 V
AC input frequency	50 Hz
Energy consumption (conventional)	- kWh

Weight and Dimensions

Depth	537 mm
Width	595 mm
Weight	30000 g
Installation compartment depth	560 mm
Installation compartment width	564 mm
Installation compartment height	600 mm