Instruction Manual | 17
Pyrolytic cleaning
Cancelling the process
Pyrolytic cleaning is an automatic process that should not be
interrupted. If you need to stop the process turn the function selector
knob to . Depending on the time you interrupt the process, the oven
may still be hot and must first cool down to °C before the door will
unlock.
Opening the door in an emergency
If the oven has suciently cooled down yet the door remains locked,
the door can be unlocked as follows:
• Set the function selector knob to
• Wait 4 minutes
• Set the function selector knob to and the oven door will unlock
after 10 minutes
To Next Page
Loading...
