8 | Instruction Manual
Automatic cooking
This function allows for a duration and an end time to be set for
cooking. For example, if you set the cooking duration to 1 hour, and
the end time to 15:00, then the oven will activate the function at 14:00.
To switch on automatic cooking
• Touch repeatedly until the display shows
dur
(duration) and the
symbol is flashing
• Set the desired duration using the
/
• Touch repeatedly until the display shows
End
and the symbol
is flashing
• Using the
/
set the end time of the cycle up to a maximum of
23 hours and 59 minutes
• Set the function selector knob and temperature selector knob
to the desired settings. The and will be illuminated on the
display and are now active. The appliance will now switch on at
the end time minus the duration set
Once the duration time has elapsed the oven will turn o
automatically. The alarm will be heard and the and symbols will
flash. Set the function and temperature selector knobs to the o
position then touch and hold the
/
or to mute the alarm. The
and will be o and the display will show the current time after
approximately 7 seconds.
To Next Page
Loading...
