Instruction Manual | 9
Cancel settings
Timer and function settings can be cancelled at any time regardless
of the status of the operation. Simultaneously touch
/
to cancel.
In order to cancel the minute minder function, first hold down and
then
simultaneously touch
/
to cancel.
Changing the beep tone
• Simultaneously touch and hold
/
• Touch repeatedly until the display shows
Ton1
• Touch
/
to select between
Ton1, Ton2
and
Ton3
Adjusting the display brightness
You can adjust the brightness of the display from 1 to 9, 1 being the
darkest and 9 the brightest. The brightness setting applies when no
controls are touched for 7 seconds.
You can adjust display brightness as follows:
• Simultaneously touch and hold the
/
• Touch
repeatedly until
Bri
shows on the display
• Use the
/
sensors to select between 1 and 9
Night mode
The display is dimmed during the hours of 22:00 - 06:00
To Next Page
Loading...
