Instruction Manual | 11
Automatic cooking
This function allows for a duration and an end time to be set for
cooking. For example, if you set the cooking duration to 1 hour, and
the end time to 15:00, then the oven will activate the function at 14:00.
To switch on automatic cooking
• First select a heating function and temperature
• Touch and hold
and the symbol will flash on the display
• Touch again and the symbol will appear on the display
• Use the and sensors to adjust the duration as needed
• Touch
and the symbol will flash on the display and the end
time will also be shown
• Use the and sensors to adjust the end time and touch to
confirm the setting
During the cooking process both the and symbols will be illumi-
nated.
Once the duration time has elapsed you will hear beeping. Touch
any sensor except
to mute the beeping. The function settings and
temperature will clear and the lighting will turn on for 30 seconds.
The symbol will go out and the appliance will turn o after 60
seconds.
To Next Page
Loading...
