20 | Instruction Manual
Pyrolytic cleaning
This function heats the oven to approximately 410°C which will burn
o or loosen any stubborn grease, stains or dirt inside the oven,
leaving behind an ash that simply has to be wiped up or swept from
the interior afterwards.
Note: Before using this function, read the chapter on cleaning and
maintenance within this instruction manual, in particular how to
remove any internal furniture from the oven.
The cleaning process
• Remove all items from the oven (baking trays and side racks) as
these can be damaged during the process
• Close the oven door
• Touch the sensor on the control panel
• The display will show the duration 2:00 hours. Touch and to
adjust the duration to 2:30 or 3:00 hours and touch to confirm
the duration and the cleaning process will start
• If the oven door is still open during these first few steps, the
symbol will flash, signifying the door lock isn't engaged. If the
door is not closed within 10 seconds the pyrolitc cleaning process
will be aborted. When the door is locked the symbol stays
illuminated and the internal lighting is o
Notes
• Temperature inside the oven cavity can exceed 410°C - Ensure no
children are near the appliance during this process
• 75 minutes before pyrolitic cleaning is complete, the heating
elements are disconnected and the current internal temperature is
displayed and the appliance begins to cool down
• The oven door will be unlocked when the temperature inside the
oven cavity cools down to 150°C and the symbol on the display
will go out
To Next Page
Loading...
