20
Installation
The appliance can be installed under a worktop or in a wall unit (open
or closed) with the appropriate dimensions for recessed installation.
Centre the oven in the unit so as to ensure a minimum distance of
10mm between the appliance and the surrounding unit. The material
of the unit supporting the appliance must be heat resistant (or
covered with a heat resistant material). For greater stability, attach the
oven to the unit with two screws through the holes provided on the
side panels.
If the appliance is to be installed under a worktop, ensure the top rail
has been removed to provide free airflow around the product.
Do not use your appliance immediately after moving it from a
cold location, as condensation may cause a malfunction. Wait
approximately 1-2 hours before use.
To Next Page
Loading...
