5
• When opening the appliance, take great care that hot water which
may have collected in the drip tray does not overflow, as this may
cause injury.
• Do not come into contact with hot steam and do not touch the hot
oven sides.
Fitting Out The Appliance
Metal shelf
The metal shelf can be used for
toasting, browning and grilling. It is also
used for steam cooking.
To install the flat shelf, insert it at a
45-degree angle and then position it
horizontally and push it all the way in, to
the end of the grill track.
To remove the flat shelf, pull it toward
you until it stops and then lift, by pulling
upwards, until it comes completely out
(Fig. 1).
Fig. 1
To Next Page
Loading...
