To Next Page

To Previous Page

Specifications

Socket Type

 ½” Female Square Drive

Display

 DISPLAY TYPE: Dot Matrix LCD (192 x 65 Resolution)

 VIEWING DIRECTION: 6:00

 BACKLIGHT: WHITE (LED)

Sealed Button Pad

POWER - ON/OFF and torque re-zero

ENTER - measurement mode select and menu entry

UP – increments settings and menu navigation

DOWN - decrements settings and menu navigation

UNITS - units select (ft-lbs, in-lbs, Nm)

RECALL – Recalls last applied peak torque

Functions

 Track - real time display of torque

 Peak Hold – 5 sec. flashing of peak torque on release of torque

 First Peak – 5 sec. flashing of peak torque after initial drop off in torque

 Peak Torque Recall – 5 sec. flashing display last peak torque measurement

Accuracy

 Temperature: @ 22°C (72°F)

CW CCW

 Torque: ±1% ±1% of reading, 10% to 100% of full scale

Dimensions: Length / Weight

DTC Range

 TORQUE: (Display Range and Resolution as shown below)

Operating Temperature: 0°F to 130°F (-18°C to 54°C)

Storage Temperature: 0°F to 130°F (-18°C to 54°C)

Measurement Drift: TORQUE: +0.01% of reading per Degree C

Humidity: Up to 90% non-condensing

Battery: Three "AA" Alkaline Cells, up to 40 hours continuous operation

A/C Adapter (Not included) A/C Adapter transformer, Voltage Input: 90 to 240VAC, 50-60 Hz, 0.8A

P/N: (DTS8269) Voltage Output: 9VDC, Current 2.2A

D/C Cigarette Lighter Receptacle D/C Adapter Cigarette, Voltage Input: 12V

(Not Included) P/N: (3325-0320-01) Voltage Output: 12V, Current 5A

Default Auto Shut-off: After 5 minutes idle – (Adjustable, see Settings)

Model Length Width Depth Weight

2503-F-DTC 13.2 in. 4.75 in. 2.2 in. 4.9 lbs.

Model Square Drive ft-lb in-lbs Nm overload (ft-lb)

2503-F-DTC ½ in. 25.0-250.0 300-3000 34.0-339.0 312.5

CDI TORQUE 2503-F-DTC User Manual

Questions and Answers: