CDI TORQUE 2503-F-DTC User Manual

4
Menu Selections:
o EXIT - Exits Main menu and returns to torque screen.
o CYCLE COUNT - Displays torque cycle count screen.
o SETTINGS - Displays DTC settings menu.
o CALIBRATION – Displays password screen (see Calibration manual).
3. To exit Main menu and return to torque measurement screen, press ENTER   button while
EXIT menu selection is highlighted.
Note: Sleep mode turns off the DTC to conserve battery power. Do not apply torque while in sleep
mode.
Note: Calibration menu is password protected. Contact the CDI Repair Center regarding Calibration.
0.00
1. PEAK FT-LB
EXIT
CYCLE COUNT
SETTINGS
CALIBRATION
ENTER
button
held
Measurement Screen
Main menu
Show Info Selection
EXIT
CYCLE COUNT
SETTINGS
CALIBRATION
Settings Menu Selection
Press
ENTER
button
EXIT
SHOW INFO
SLEEP TIME
LCD CONTRAST
Press
ENTER
button
CAL: 2014/01/01
CWOI: 0.00
CWOR: 35
CW1I: 250.10
CW1R: 15931
CCWOI: 0.00
CCWOR: 10
CCW1I: 250.10
CCW1R: -15870
TQZ: 18
OVR CNT: 0
VER: 1.0.0
Press
ENTER
Button
to EXIT
Show Info Screen
screen
Cycle Count Screen
EXIT
CYCLE COUNT
SETTINGS
CALIBRATION
Main Menu
Press
ENTER
button
COUNT: 12
CLEAR
EXIT
UP/DOWN
buttons
COUNT: 0
CLEAR
EXIT
Press
ENTER
button
Cycle Count Screen
Press
ENTER
button
to Exit
UP/DOWN
Buttons to
select from
20 to 80
EXIT
SHOW INFO
SLEEP TIME
LCD CONTRAST
CONTRAST: 40
CONTRAST: 80
Press
ENTER
button
LCD Contrast Selection
LCD Contrast Screen
LCD Contrast Screen
EXIT
SHOW INFO
SLEEP TIME
LCD CONTRAST
SLEEP TIME
5 MIN
EXIT
SLEEP TIME
8 HR
EXIT
Press
ENTER
button
UP/DOWN
Buttons to
select
from
2 min. to 8
hrs.
Press
ENTER
button
to Exit
Sleep Time Screen
Sleep Time selection
Sleep Time Screen

CDI TORQUE 2503-F-DTC Specifications

General

Brand	CDI TORQUE
Model	2503-F-DTC
Category	Measuring Instruments
Language	English