G0301FR0145V01 Ed : 0799 English
4
USER CODE GROUPS
GROUP 1 : From 1 to 4 RELAY 1 Green LED
GROUP 2 : From 5 to 8 RELAY 2 Red LED
* A user code can be programmed into 2 groups to control simultaneously the 2 relays.
SECURITY TIME DELAY
. Key-in keypad delay: 10 seconds maximum
. Programming mode exit delay: 60 seconds maximum
. Lockout delay: 30 seconds
GENERAL RESET
. Cut the power supply of the keypad
. Short- circuit with the jumper.
. Put the power supply back for about 1 second. Remove the jumper
. The keypad is reset to the factory default values.
NOTE
Each time you key-in, the LED lights off during 0.1 second to indicate the validation of the key.
After 6 incorrect code, the keypad locks out during 30 seconds.
To Next Page
Loading...
