Need help?Do you have a question about the CDVI Digicode Series and is the answer not in the manual?
General| Category | Keypad |
|---|---|
| Manufacturer | CDVI |
| Series | Digicode Series |
| IP Rating | IP54 |
| Tamper Output | Yes |
| Weight | 200g |
| Number of Codes | 100 |
| Number of Digits | 4 to 8 |
| Operating Voltage | 12/24 Vac/dc |
| Relay Output | 1 (NO/NC) |
Details on recommended cable types and length limits for connecting components.
Advice on mounting the keypad on a flat surface for security and stability.
Recommendations for setting master and user codes to enhance security.
Guidance on installing the varistor to prevent electromagnetic interference.
Lists suitable power supply models for the PROFIL100EC keypad.
Illustrates the connections and components of the remote electronics board.
Details the function and connection of each output terminal on the board.
Explains the operation of P1 and P2 inputs for activating relays.
Presents the factory default settings for illumination and relays.
Procedure to restore default master code and clear all user codes.
Configures the number of digits for user and master codes.
Procedure to modify the master code used for programming.
Instructions for adding, changing, and deleting user codes.
Configures illumination time and relay activation times.
Resets the master code to its default value using the P2 jumper.
Allows users to modify their own codes using a sub master code.
Enables setting a sub master code for individual user code modification.
Configuration of audible feedback for key presses and relay activation.
Wiring and function of the device's indicator LEDs.
Configures the duration of illumination for the keypad.
Sets the activation time for the first relay output.
Sets the activation time for the second relay output.
Defines whether codes are 4 or 5 digits long.
Procedure to change the master code.
Resets the keypad to factory default settings.
Sets the first sub master code for user management.
Sets the second sub master code for user management.
Configures the audible feedback for key presses and operations.
Flowchart for managing user codes, including adding and deleting.
To Next Page
