5/2004 G0301FR0226V01 Edition 0
A. Features
Input voltage 12v AC/DC
12-digit keypad
EPROM memory storage
100 Pin codes, 3 to 8-digit Pin code
1 relay output N/O and N/C contact 3A/125V~
3 to 8-digit master code
Audible and visual signal indication
1 request-to-exit input
WIRING DIAGRAM AMD INSTRUCTIONS
PROMI E
100 Pin codes
I. PRESENTATION
This device comes with a varistor.
The varistor must be connected to the strike terminal
(electromagnet…) operated by the device.
If this product works with many strikes, each of them
should have a varistor.
The varistor controls the overload produced by the strike
coil – emf.
If you are using a « Shear Loc
» electromagnetic lock, it is recommended to
use a separate power supply than the one connected to the PROMI/ECO !
To Next Page
Need help?
General
