Cebora Plasma Sound PC 70/T

Need help?

Do you have a question about the Cebora Plasma Sound PC 70/T and is the answer not in the manual?

Summary

Safety Precautions

Noise Hazards

Potential noise levels from plasma cutting/welding may require precautions.

Electric and Magnetic Field (EMF) Risks

EMF fields from welding/cutting current may affect pacemakers and health.

Electrical Equipment Disposal

Proper disposal of electrical equipment according to EU Directive 2012/19/EC.

Qualified Personnel for Malfunctions

Request assistance from qualified personnel for any equipment malfunctions.

Warning Label Identification

Identification of warning label code 3098464 and its corresponding text.

General Equipment Description

Equipment Components Overview

Lists and describes the various components of the plasma cutting equipment.

Technical Specifications Explanation

Specifications for Art. 334

Detailed technical specifications for model Art. 334, including duty cycle, current, and voltage.

Specifications for Art. 336

Detailed technical specifications for model Art. 336, including duty cycle, current, and voltage.

Specifications for Art. 337

Detailed technical specifications for model Art. 337, including duty cycle, current, and voltage.

Cooling, Operating Temperature, and Dimensions

Gases and Working Conditions

Specifications for gases used and their required working conditions.

Installation and Setup

Unpacking and Placement

Instructions for unpacking and positioning the power source.

Welding Torch Assembly

Step-by-step guide for assembling the welding torch.

Start-Up Procedure

Steps for correctly connecting and starting the machine.

Operation and Controls

Machine Information Display

Details shown on the display N when the device is turned on.

Cutting Operating Mode

Instructions and settings for the plasma cutting operation.

Grid Cutting Mode

Operating mode for cutting grids or drilled plates, with self-restart function.

Gouging Operation Mode

Operating mode for gouging operations using the hand torch.

Spot Mark Operation Mode

Operating mode for creating spot marks, including CNC integration.

Replacing Consumables

Consumable Identification and Replacement

Identifies wear parts like electrode, nozzle and guard, and how to replace them.

Helpful Hints and Recommendations

Air Quality and Part Cleaning

Tips on air quality, cleaning consumables, and using original parts.

Protective Devices and Error Codes

Protective Device Functionality

Ensuring efficiency of protective devices and using original parts.

Error Code Troubleshooting

Table of error descriptions, error codes, and possible solutions.

Cutting Quality Optimization

Factors Affecting Cut Quality

Parameters and settings to achieve optimal cutting quality.

Troubleshooting Cutting Problems

Identifies common cutting problems and provides solutions.

Repair and Maintenance

Power Source and Torch Maintenance Schedule

Recommended daily, weekly, monthly, and six-monthly maintenance operations.

Post-Repair Precautions

Safety precautions to take after performing repairs on the machine.