cecotec 3D ForceAnodized 750 Smart User Manual

Manual de instrucciones
Instruction manual
Інструкція з експлуатації
Руководство по
эксплуатации
3D ForceAnodized 750 Smart
Plancha de vapor/Steam iron/
Праска/Утюг

cecotec 3D ForceAnodized 750 Smart Specifications

General

Type	Steam Iron
Soleplate Material	Anodized Aluminum
Weight	1.5 kg
Cord Length	3 m
Features	Anti-drip system

Summary

Parts and Components Identification

Soleplate

The main flat surface of the iron that contacts the fabric.

Water-Spray Nozzle

Sprays water to dampen fabrics for easier ironing.

Water-Filling Opening Cover

Protects the water tank opening when not in use.

Steam Knob

Controls the amount of steam released during ironing.

Steam-Burst Button

Releases a powerful burst of steam for stubborn wrinkles.

Water-Spray Button

Activates the water spray function.

Cord Protector

Protects the power cord from damage at the connection point.

Handle

The part used to hold and maneuver the iron.

Water Tank

Stores water for steam generation.

Self-Cleaning Button

Initiates the self-cleaning process to remove mineral deposits.

LCD Display

Shows selected settings, temperature, and status.

+ and - Buttons

Used to adjust settings like temperature or fabric type.

Safety Instructions

Electrical Safety Precautions

Ensure voltage match, grounded outlet, and dry hands before plugging in.

Safe Handling and Placement

Do not leave unattended, place on stable surface, avoid touching hot parts.

Power Cord Protection

Do not pull cord, avoid strain, protect from edges and heat sources.

Liquid Immersion Warning

Do not immerse cord/plug in water or other liquids.

Damaged Cord Procedures

Check cord for damage; replace by authorized service if damaged.

Steam Burn Hazard

Avoid contact with hot steam generated by the iron to prevent burns.

Water Type and Filling

Use distilled water; unplug before filling or emptying the water tank.

Child Safety and Supervision

Not for unsupervised children under 8; supervised use for older children.

Operation Guide

Initial Preparation Before Use

Remove packaging, clean soleplate with a soft cloth.

Water Tank Filling

Unplug iron, rest on heel, tilt, and fill water to MAX mark.

Vertical Steaming

Ensure water, stand iron vertically, set max temp/steam, press burst.

Dry Ironing

Set steam knob to '0', select fabric temperature.

ECO Mode

Select ECO mode for energy-saving steam ironing.

Steam Ironing Settings

Fill water, plug in, select fabric type/steam level via +/- and knob.

Safe Start-Up Mode

Soleplate does not heat initially; use to turn iron off.

Synthetic Clothes Ironing

Low temperature and no-steam operation for synthetics.

Wool/Silk Ironing

Medium temperature and no-steam ironing for wool and silk fabrics.

Cotton Ironing

High temperature and steam operation for cotton fabrics.

Linen Ironing

Maximum temperature and steam operation for linen fabrics.

Standby Mode (Auto-off)

The iron automatically turns off after a period of inactivity.

Steam Burst Function

Press button for intense steam; only for high-temp ironing.

Spraying Function

Sprays water at any temperature during steam or dry ironing.

Self-Cleaning Procedure

Unplug, set steam to '0', fill water, set max temp, press self-clean.

Auto-Off Function Details

Iron turns off horizontally after 25s, vertically after 8 mins; reset by moving.

Anti-Drip Function

Prevents water spills when iron is not hot; may emit clicking sounds.

Cleaning and Maintenance

Built-in Antiscale System

Reduces limescale buildup to prolong iron's shelf life.

General Cleaning Steps

Unplug, empty tank, cool down; wipe soleplate with damp cloth/vinegar.

Cleaning Blocked Steam Holes

Use a toothpick to clear blocked steam holes.

Storage Position

Store iron upright on its heel rest to protect the soleplate.

Troubleshooting and Specifications

Troubleshooting Heat Issues

Check temperature knob setting and ensure iron is plugged in.

Troubleshooting Steam/Leakage

Verify temperature knob, steam knob, and iron heat for steam/leakage.

Troubleshooting Soleplate Leaks

Ensure iron is hot enough, check steam knob, and water level.

Troubleshooting Low Steam

Check steam knob position and clean steam holes with distilled water.

Troubleshooting Spray Function

Check water level and press spray nozzle/button multiple times.

Product Model and Reference

Model: 3D ForceAnodized 750 Smart, Reference No: 05103.

Electrical and Manufacturing Details

3100 W, 230 V, 50 Hz. Made in China | Designed in Spain.

Disposal and Warranty

Disposal of Electrical Appliances

Dispose of appliances separately according to WEEE directive.

Consumer Disposal Guidance

Contact local authorities or retailer for correct disposal information.

Product Warranty Information

2-year warranty from purchase date with proof and proper use.

Warranty Exclusions

Covers manufacturing defects; excludes misuse, modification, wear and tear.

Technical Support Contact

Contact Cecotec Technical Support Service at +34 963 210 728 for issues.