BONGO D40 XL CONNECTED
67
ENGLISH
5.4 Wheel use
- For a correct operation of the electric scooter, you should check and ensure the correct
pressure on the wheels before every use.
- The optimum pressure for these wheels is de 36 PSI / 2.5 bars / 250 kPa.
- We recommend you carry out periodic checks to ensure the pressure is within the
recommended values to achieve ecient operation.
- During the shelf life of the wheels, we recommend using heat-sealing gels to prevent
punctures and maintain maximum eectiveness and performance.
5.5 Pairing
By scanning the following QR code you will be able to access the app download option and an
instruction manual explaining how to pair your appliance::
6. CLEANING AND MAINTENANCE
- Make sure the device is not plugged to the power supply or switched on before cleaning
or maintenance.
- Use a soft cloth to clean the exterior housing of the electric scooter.
- Never use alcohol, petrol, paran, corrosive, or abrasive products to clean the electric
scooter.
- Never immerse the electric scooter in water or any other liquid to clean it, as this could
damage the electronic parts permanently.
- Never use pressurised water to clean the electric scooter.
- Do not try to repair the electric scooter on your own. Should it not work correctly or be
damaged, please contact the ocial Cecotec Technical Support Service.
- Self-tapping nuts and other fasteners may loosen their hold and need to be retightened.
Brake disc
You must check the brake discs are in perfect condition, matching the brake calliper: x this
easily with the Allen key provided. Brake pads are consumable parts and must be replaced
when their shelf life expires.
Storage
- Make sure the electric scooter is charged before storing it for long periods of time. Charge
it at least once a month.
To Next Page
Loading...
Need help?
General