ENGLISH
40
CLEANING THE WATER TANK
1. Take the water tank out and detach the mop.
2. Empty the remaining water and air the water tank until it is completely dry.
CLEANING THE MAIN BRUSH, THE SUCTION CHANNEL AND SIDE BRUSHES
1. Remove the main brush’s cover, take the brush out and remove any hair and dust.
2. Use a cloth to clear and clean the suction channel
3. Remove the side brushes from the robot and use a cloth to clean them.
05133_Conga 1190 Gyro_Manual_PE.indd 40 1/8/18 12:38
To Next Page
Loading...
