ENGLISH
41
CLEANING THE OMNIDIRECTIONAL WHEEL AND FREE-FALL SENSORS
1. Clean the omnidirectional wheel with a brush or cloth to avoid hair from tangling around it.
2. Use a brush to clean the free-fall sensors in order to keep them sensitive.
CLEANING THE CHARGING TERMINALS
1. Use a dry cloth to clean the charging terminals on the robot and on the charging base.
Note: take the battery out of the main body and clean the battery compartment if the product
is not going to be used for a long time.
05133_Conga 1190 Gyro_Manual_PE.indd 41 1/8/18 12:38
To Next Page
Loading...
