cecotec CONGA 3890 - App Modes: Auto, Edge, Spiral, Scrubbing, Manual; App Modes: Back Home, Smart Area

34 | CONGA 3890
ENGELSK
b. The Wi-Fi password is incorrect.
The following modes can be activated from the App:
Auto mode
Select this mode for the robot to clean 4x4 m quadrants. Within this space,
it will carry out a rst cleaning cycle in Edge mode and then in zigzag motion
to complete the surface. Once it has nished, it will directly return to the
charging base.
It can be activated from the App or the remote control.
Note: The robot could leave the room to complete the cleaning cycle in some
of the quadrants. This will not aect the robot’s operating, do not worry.
Edge mode
Select this mode for the robot to clean along walls and furniture.
It can be activated from the App or the remote control.
Spiral mode
When this mode is selected, the robot will start cleaning in a specic point,
and then will clean carrying out moves in spiral motion outwards.
It can only be activated from the App.
Scrubbing mode
When this mode is activated, the robot moves in a swaying motion,
simulating real scrubbing moves. It starts o cleaning in Edge mode, then in
zigzag motion and nally returns to the charging base taking the straightest
way back home.
It can only be activated from the App.
Manual mode
To carry out manual cleaning, use the direction buttons on the remote
control or on the App to take the robot to the specic points where you want
it to clean.
It can be activated from the App or the remote control.
Back home mode
Select this mode at any point of any cleaning cycle and during any of the
modes, the robot will automatically return to the charging base.
It can be activated from the robot, the remote control or the App.
Smart Area mode
Once the home’s map has been saved, select this mode for the robot to clean