ENGLISH
41
1 2 3
4 65
HIGH-EFFICIENCY FILTER
Remove the high-efciency lter and shake it to remove all the dust.
Note:
• Replace the high-efciency lter every 3 months (depending on
the frequency and type of use).
• Clean the lter periodically with a brush to avoid blockage.
• Wash the lter with water and dry it thoroughly before
reassembling it. Do not use detergents.
SIDE BRUSH
Remove and clean the side brushes regularly.
Note: in order to ensure a perfect cleaning, it is suggested to replace the
side brushe every 3 months.
FREE-FALL SENSORS
Clean the free-fall sensors with a soft cloth regularly.
Warning: Always transport the product turned off and in its
original package.
To Next Page
Loading...
