EasyManua.ls Logo

cecotec CONGA - Product Assembly; Aluminium Suction Tube Assembly; Suction Base Attachment

cecotec CONGA
68 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
CONGA THUNDERBRUSH 790 IMMORTAL BATTERY 25,9 V
ENGLISH
3-in-1 accessory: this accessory is designed to clean small rooms, cracks or irregular surfaces
such as corners, window frames, drawers, picture frames, keyboards etc.
3. PRODUCT ASSEMBLY
1. Aluminium suction tube
Introduce the aluminium tube’s end in the dust tank in a horizontal position. Make sure a
“click” sound is heard, indicating it is properly fixed.
To remove the aluminium suction tube from the dust tank, hold the dust tank with one
hand while you press the release button and with the other hand pull the suction tube out.
2. Suction base
Introduce the suction base into the aluminium suction tube’s end and make sure it is se-
curely fixed. Make sure a “click” sound is heard, indicating it is properly fixed.
To remove the suction base from the aluminium suction tube, hold the suction base with
one hand and with the other hand pull the aspiration base out.

Related product manuals