EasyManua.ls Logo

cecotec CONGA - Troubleshooting; Product Does Not Work; Low Power Level; Unusual Sounds

cecotec CONGA
68 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
CONGA THUNDERBRUSH 790 IMMORTAL BATTERY 25,9 V
ENGLISH
Problem Cause Solution
The product does not work. The battery is low
The suction base is
blocked
Connect the power
adapter to the product
and charge it
Clean the suction base
Clean the aluminum
suction tube
The product vacuums at low
power level
The dust tank and fil-
ters are dirty
The suction base is
blocked by hairs or
other objects
Clean the dust tank and
filters regularly
Clean the suction base’s
accessories
The product emits unusual
sounds
The aluminum suction
tube is blocked.
Clean the aluminum
suction tube and remo-
ve any blockages..
The suction base does not
vacuum or the LED is not li-
ght up
The suction base is tan-
gled or blocked by fo-
reign objects
Remove the suction
base, clear and clean it
properly and install it
back in its place
The power indicator light
flashes.
The suction base or
dust tank is blocked
The room temperature
is too high or too low
The product is being
charged with a non-ori-
ginal power adapter
Clean the blockage
Place the product on a
new location where the
temperature is optimal
(0 - 55 ° C)
Use the original adapter
to charge the product

Related product manuals