cecotec CREMMAET COMPACT STEAM - Parts and Components; Control Panel Overview; Before Use; Packaging and Initial Checks

CREMMAET COMPACT STEAMCREMMAET COMPACT STEAM
4140
ENGLISH ENGLISH
3. INSTALLATION AND INITIAL USE
1. Remove the coee machine from the box and save the packaging material for future use.
Place the machine on a at and stable surface. Fig. 3
2. Remove and clean the water tank Fill it with water and insert it into the coee machine.
Fig. 4
3. Fill the container with coee beans. Fig. 5
4. Plug in the coee machine.
5. Place a container under the coee spout to collect the hot water dispensed by the coee
machine.
6. Press the power button to switch on the machine and clean the coee spout. Fig. 6
7. Press and hold down the ” ” button for 3 seconds to start cleaning/ushing of
the coee machine. Discard the water dispensed by the coee machine and clean the
container.
8. Press the buttons according to the function you want to activate.
9. Press and hold the power button for 3 seconds to switch o the coee machine.
4. OPERATION
Filling up the water tank. Fig. 4
- Remove and clean the water tank
- Fill it with water and insert it into the coee machine.
NOTE:
Never exceed the maximum capacity of the water tank.
Making an espresso
1. Ajuste la altura de la salida de café y coloque una taza debajo. Fig. 7
2. Press the espresso button “ ”once to brew one small espresso.
3. Select the desired amount of coee.
4. During grinding (the control panel display shows “g”), press the “ ” or “ ” buttons to
adjust the amount of coee powder. During coee preparation (“ml” is displayed on the
right-hand side of the control panel display), press “ ” or ” to adjust the amount of
liquid coee.
5. Press the “ ” button to prepare two cups of coee.
6. Press “ ” to stop coee preparation.
Preparing an Americano
1. Adjust the height of the coee spout and place a cup underneath. Fig. 7
2. Press the Americano button “ ” to prepare an Americano coee.
1. PARTS AND COMPONENTS
Fig. 1
1. Water tank
2. Coee bean container
3. Grinding level knob.
4. Control panel
5. Steamer
6. Coee spout
7. Power button
8. Drip tray
9. Coee residues tank
10. Brewing unit
11. Side panel
Control panel. Fig. 2
1. Espresso
2. American
3. Hot water
4. Double coee/Cleaning
5. Steamer/Conrm
6. Settings/Exit
NOTE
The graphics in this manual are schematic representations and may not exactly match the
appliance.
2. BEFORE USE
- This appliance has a packaging designed to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the appliance
when transporting it in the future. In case the original packaging is disposed of, make sure
all packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the ocial Cecotec Technical Support Service
immediately.