To Next PageTo Next PageWhy is my cecotec FREEGO WASH Steam Cleaner losing suction?
The suction force might be lower due to several reasons: the waste-water tank might be full (clean it!), the rotary brush cover or waste-water tank might not be properly installed (correctly install them!), there might be tangled hair in the rotary brush (clean the brush!), or the battery may be low (charge the appliance!).
What to do if cecotec FREEGO WASH doesn't turn on?
If your appliance isn't working, it could be due to a few reasons: It might not be charged (charge it!), you may not have pressed the power button (press it!), or the rotary brush could be blocked (clean the base and rotary brush!).
How to fix cecotec FREEGO WASH Steam Cleaner not moistening the brush?
If the brush isn't moistening, it's likely due to one of two issues: either there's no water in the water tank (add water!), or the water tank isn't properly assembled (install it correctly!).
Assembling the main body and handle of the appliance for first-time use.
Guide on how to attach and detach the clean water tank.
Instructions for attaching and removing the waste-water tank.
Steps to add clean water to the appliance's water tank.
Procedures for attaching and detaching the floor brush.
How to operate the appliance for cleaning tasks.
Instructions on how to charge the appliance's battery.
Guide on using the automatic cleaning cycle for the mop.
Steps to clean the tank that collects dirty water after use.
Instructions for cleaning the rotating brush and its area.
Guidelines for proper upkeep and storing the appliance.
General| Product Name | Cecotec FreeGo Wash |
|---|---|
| Category | Steam Cleaner |
| Power | 1000 W |
| Type | Handheld |
| Heating Time | 3 min |
| Accessories | brush |
