cecotec FREEGO WASH - Technical Specifications; Disposal of Old Electrical and Electronic Appliances; Technical Support and Warranty

FREEGO WASH
40
ENGLISH
The appliance
doesn’t
moisten the
brush.
1. No water in the water tank.
2. The water tank is not properly
assembled.
1. Add water to tank.
2. Install the water tank
correctly.
7. TECHNICAL SPECIFICATIONS
Product reference: 05862/ 04544/ 04545/ 04546/ 04547
Product: FreeGo Wash /X/ S/ T/ M
Rated power: 40 W
Adapter:100-240 V,50-60 Hz 0.5A
Battery capacity: 1500 mAh
Charging time: approximately 3-4 hours
Water tank: 420 ml
Waste-water tank: 350 ml
Technical specications may change without prior notication to improve product quality.
Made in China | Designed in Spain
8. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES
This symbol indicates that, according to the applicable regulations, the product
and/or battery must be disposed of separately from household waste. When this
product reaches the end of its shelf life, you should dispose of the cells/batteries/
accumulators and take them to a collection point designated by the local authorities.
For detailed information on the most appropriate way to dispose of electrical
and electronic equipment and/or batteries, consumers should contact their local
authorities.
Compliance with the above guidelines will help protecting the environment.
9. TECHNICAL SUPPORT AND WARRANTY
Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the
time of delivery of the product under the terms, conditions, and deadlines established by the
applicable regulations.
It is recommended that repairs be carried out by qualied personnel.
If at any moment you detect any problem with your product or have any doubt, do not hesitate
to contact the ocial Cecotec Technical Support Service at +34 963 210 728.
05862_FreeGo Wash_IM_LI.indd 4005862_FreeGo Wash_IM_LI.indd 40 7/3/23 10:217/3/23 10:21