CED CED7000 - Repetitive Mode; Combined Comstock Mode

13.
REPETITIVE MODE:
ThisadvancedfeatureoftheCED7000is idealforPPC, UIT,Police,& Militaryqualicationtype
courseswhereaseriesofsimulated“exposures”atxedintervalsarerequired.Thisfunctionsimulates
theeffectofaturningtargetsystemwherethe“Face”and“Edge”timesareselectedbytheuser,aswell
as the desired number of times it is to be repeated.
SelectMODEfromtheMENUandthentheREPETITIVEMode.TheuserthenselectsagivenPAR
time,followedbyaspeciedEDGEtimeandthenthenumberoftimesitistobe
repeated.Usetheright/leftdirectionalkeystomoveforwardorbackwardandtheup/downdirectional
keystoselectvalueforeachsetting.KeepinmindthattheselectednumberofREPEATSisaddedto
therstactivation.Therefore,if3repeatsareselected,thetimerwillruntherstPartimeandthen
repeatitthreetimes,makingatotalofFOURPar(Face)times.
Thestartoftheselected“Face”periodisindicatedbythepressingofthe“Start”buttonandthesound-
ingofthebuzzer.IftheAuxiliaryjackisinuse,a5.0voltD.C.impulsewillbeemittedindirectsyn-
chronization with the buzzer, which allows the user to activate a real turning target replay if so desired.
At the end of the set Par time, the buzzer (and 5.0 volt impulse if in use) will beep for 0.30 seconds
indicatingtheendofthe“Face”period,andthebeginningofthe“Edge”period.Aftertheselected
EDGEtimeexpires,thesequencewillstartagain,andcontinuedoingsountilithascompletedthefull
amount of repeats that have been pre-set into the timer.
The“Repeats”willbedisplayedintheSTRINGcolumnduringthe“Edge”time,whichinturnwill
displayasacountdowninthesamefashionasanormaldelaydoes.Duringthe“Face”time,thetimer
will display shots received in the SHOT column.
* A programmed function may be stopped (interrupted) at any time during the running of the
program by pressing the REVIEW button. However, pressing the REVIEW button will return
the program to the beginning.
COMBINED COMSTOCK MODE:
The CED7000 features the ability of combining several “Comstock” scores cumulatively. Designed
forsituationswheretheuserwantstoaddthetimeoftwoormorestringstogether,butrequireseparate
start beeps. When the Timer is set in this mode, it will restart from the exact time and number of shots
last displayed on the timer prior to restarting it and will continue to accumulate both from that point
onward. The user can re-start the timer as many times as desired, with each new start resulting in a
continuedcumulativeshotandtimerecording.Tore-startthetimerfromzero,pressthe“CLEAR”but-
tonTWICE.Toendthe“CombinedComstock”function,enterthepreferenceMENU,selectMODE,
and then select “COMSTOCK” & press enter or select CLEAR MODE from the Menu and press
ENTER.Thiswillclearanysetting,function,ormodeincurrentuseandreturnthetimertoComstock
ready mode.